TIEVAL
POWERING AEROSPACE NDT
Tieval News 2017
Major order received from NDT Ltd. in Sheffield, England for a TDS15-7 seven axis automated disc inspection system.
November 2017
Major order received from GKN Aerospace in San Diego for an M403V Fan Blade Scanner for IAE V2500 Inspection.
Installation of re-furbished six axis immersion inspection system carried out at Airbus UK in Filton, England.
October 2017
Calibration of Midas-NDT two axis immersion inspection system carried out at Solvay in Wrexham, Wales.
Staveley disc inspection system calibrated at Arconic Forgings & Extrusions in Darley Dale, England.
New system update introduces inspection of the Rolls Royce Trent XWB-84 on M403T aero-engine fan blade scanners.
September 2017
Calibration of Tieval disc inspection system at Arconic Forgings & Extrusions in Darley Dale, England.
Calibration of SI disc inspection system carried out at Arconic Forgings and Extrusions in Darley Dale, England.
August 2017
Calibration of three M403T fan blade scanners for Trent fan blade inspection carried out at SAESL in Singapore.
Tieval are pleased to welcome Safran Nacelles in Burnley, England as a new major customer.
Calibration of Scan Master disc inspection system at Arconic Forgings & Extrusions in Darley Dale, England.
July 2017
M403T fan blade scanner calibration and upgrade carried out at Intertek NDT in Derby, England.
Calibration of five M403T fan blade scanners for Rolls Royce Trent engine inspection carried out at HAESL in Hong Kong.
Calibration of two M403V fan blade scanners for RB2-11 engine inspection carried out at HAESL in Hong Kong.
Tieval are pleased to welcome Testia Ltd. In Newport, Wales as a new major customer.
Calibration of M403V fan blade scanner for IAE V2500 inspection carried out at MTU Maintenance in Zhuhai, China.
Instrument calibrations carried out on five disc inspection systems at Arconic in Darley Dale, England.
June 2017
M403V fan blade scanner for V2500 and RB2-11 inspection installed at Bischoff Aerospace in Hialeah, Florida.
M403V fan blade scanner for IAE V2500 inspection calibrated at MTU Maintenance in Hannover, Germany.
Calibration of M403V fan blade scanner for RB2-11 and V2500 inspection carried out at AMECO in Beijing, China.
Calibration of Midas-NDT jet probe system carried out at the National Composites Facility in Manchester, England.
Tieval are pleased to welcome Delta TechOps at Hartsfield-Jackson Atlanta Airport as a new major customer.
May 2017
Disc inspection system upgrade carried out at Arconic Forgings & Extrusions in Darley Dale, England.
Calibration of two M403V, IAE V2500, fan blade scanners carried out at GKN Aerospace in San Diego, USA.
Tieval are pleased to welcome Bischoff Aerospace based in Miami, Florida as a new major customer.
Calibration of M403V, IAE V2500, fan blade scanner carried out at IHI  in Tokyo, Japan.
Major upgrade to shaft inspection system at Arconic Forgings & Extrusions in Darley Dale, England.
Calibration of Midas-NDT billet inspection system carried out at Materion AMC in Farnborough, England.
March 2017
Calibration of M403T fan blade scanner carried out at GKN Aerospace in San Diego, USA.
As part of company continuous improvement, two engineers undertake ultrasonic training at the South West School of NDT.
Calibration of three M403T fan blade scanners carried out at Lufthansa Technik in Hamburg, Germany.
February 2017
Calibration of two M403V fan blade scanners carried out at Lufthansa Technik in Hamburg, Germany.
Fourth M403T fan blade scanner installed at Lufthansa Technik in Hamburg, Germany.
Krautkramer Disc Inspection System calibration carried out at Arconic in Darley Dale, England.
January 2017
Euroteck Disc Inspection System calibration carried out at Arconic in Darley Dale, England.
Due to major business growth, Tieval announce the decision to re-locate to new premises in January 2018.
December 2017
M403V Fan Blade Scanner calibration carried out at Iberia in Madrid, Spain.
M403V Fan Blade Scanner calibration carried out at MTU Maintenance in Hanover, Germany.