TIEVAL
Tieval News 2019
January 2019
Krautkramer disc inspection system calibration carried out at Arconic in Darley Dale, England.
Aero-engine disc inspection system relocated at Element in Rotherham, England.
Calibration of two M403V V2500 aero-engine fan blade scanners carried out at Lufthansa Technik in Hamburg.
February 2019
M403V Fan Blade Scanner for IAE V2500 inspection installed at GKN in San Diego, USA.
Calibration of two M403V Fan Blade Scanners for IAE V2500 inspection carried out at GKN in San Diego, USA.
March 2019
M403T Fan Blade Scanner for Rolls Royce Trent inspection calibrated at GKN in San Diego, USA.

M403V IAE V2500 Fan Blade scanner despatched to PWES Turkish Engine Center in Istanbul.
Calibration of four M403T Trent aero-engine fan blade scanners carried out at Lufthansa Technik in Hamburg, Germany.
Ultrasonic bar inspection system relocated at Element Materials in Rotherham, England.
Calibration of M403V RB2-11 aero-engine fan blade scanner carried out at Bischoff Aerospace in Miami, Florida.

Midas-NDT flatbed composite inspection system calibrated at Element Materials Technology in Dudley, England.

M403V Rolls Royce RB2-11 fan blade scanner calibration carried out at Iberia in Madrid, Spain.
Calibration of aero-engine shaft inspection system carried out at Arconic in Darley Dale, England.

April 2019
Tieval are pleased to welcome Airbus Defence & Space in England as a major new customer.
Major order received to install fully refurbished M403V fan blade scanner at GKN Engine Systems in Johor, Malaysia.
Calibration of Midas-NDT billet inspection system carried out at Materion in Farnborough, England.
Calibration of M403V Fan Blade Scanner for IAE V2500 aero engine inspection carried out at IHI in Mizuho, Japan.
May 2019
Tieval engineers calibrate three Midas-NDT composite scanning systems at Safran Nacelles in Burnley, England.
Calibration of two M403V Fan Blade Scanners for IAE V2500 aero engine inspection carried out at HAESL in Hong Kong.
June 2019
RB2-11 524G/H & T inspection introduced on the M403T fan blade scanner.
SI disc inspection system calibration carried out at Arconic Forgings & Extrusions in Darley Dale, England.
Calibration of M403V V2500 aero-engine fan blade scanner carried out in MTU in Hannover, Germany.
Calibration of M403V V2500 aero-engine fan blade scanner carried out in MTU in Zhuhai, China.
ScanMaster disc inspection system calibrated at Arconic Forgings & Extrusions in Darley Dale, England.
July 2019
Major order received to install M403T Fan Blade Scanner for Trent engine inspection at Delta TechOps in Altanta, USA.

Calibration of Midas-NDT composite systems carried out at Airbus Defence & Space in Stevenage, England.

Calibration of five M403T Fan Blade Scanners for Trent aero engine inspection carried out at HAESL in Hong Kong.
Order received from Kaman Composites to upgrade two inspection systems in Darwen, England.
Major upgrades to disc inspection system carried out at Element Materials Testing in Rotherham, England.
Major new order from Safran Nacelles to upgrade engine cowl inspection system in Burnley, England.

August 2019
Calibration of SI Ultrasonic Disc Inspection System carried out at Doncasters in Blaenavon, Wales
Calibration of four M403T Fan Blade Scanners for Trent aero engine inspection carried out at SAESL in Singapore.
TiView version 4.0.0.1 software release for the M403T fan blade scanner is now available in the blade zone.
September 2019
Calibration of Midas-NDT immersion inspection system carried out at Testia in Filton, England.
TiView version 4.0.1.2 software release for the M403T fan blade scanner is now available in the blade zone.
Rotary disc inspection system calibration carried out at Element Materials Technology in Rotherham, England.
Calibration of Meccasonics immersion inspection system carried out at Solvay in Wrexham, Wales.
Two Midas-NDT inspection system calibrations carried out at Roxel in Kidderminster, England.
October 2019
Replacement multi-axis arms fitted to Midas-NDT inspection system at Safran Nacelles in Burnley, England
Major upgrades carried out to horizontal inspection system at Kaman Composites in Darwen, England.
November 2019
Major upgrades carried out to vertical inspection system at Kaman Composites in Darwen, England.
Calibration of SI Ultrasonic Disc Inspection System carried out at Doncasters in Blaenavon, Wales.
December 2019
Calibration of M403V V2500 aero-engine fan blade scanner carried out in MTU in Hannover, Germany.
TiView version 4.0.2.3 software release for the M403T fan blade scanner is now available in the blade zone.
Tieval Ltd.     Units 12/14 Forest Vale Road     Cinderford     GL14 2PH     England

Company No. 8665662   VAT No. 169 5287 61      Tel: +44 (0)1594 823325      E-Mail: sales@tieval.com